How To Repair Plastic Hood

slowkansasboy

Posted seven/25/2018 17:25 (#6892357) Discipline: Agglutinative to fix croaky plastic hood

I take a John Deere 7130 tractor,and the hood has cracked back where information technology mounts well-nigh the hinges at the rear. JB weld didn't piece of work what type of mucilage would work best? And I am not ownership a new hood nonetheless.
Tia
Jason_WI

Posted 7/25/2018 17:49 (#6892390 - in respond to #6892357) Subject: RE: Adhesive to fix cracked plastic hood

NE WI

Probably demand to take information technology plastic welded. Well-nigh adhesives don't stick well to plastic.

https://www.harborfreight.com/plastic-welding-kit-with-air-motor-and...

deereboy8400

Posted 7/25/2018 17:59 (#6892399 - in reply to #6892357) Subject: RE: Adhesive to fix croaky plastic hood

East Fundamental Indiana

After welding or gluing, build it upwardly with fiberglass. Birddy

Posted 7/25/2018 18:00 (#6892401 - in reply to #6892399) Subject: RE: Adhesive to set up cracked plastic hood

ND

deereboy8400 - 7/25/2018 17:59 Afterwards welding or gluing, build information technology upwardly with fiberglass.

Not sure nigh that, it will not stick.

bollpuller

Posted vii/25/2018 19:16 (#6892533 - in answer to #6892357) Subject: RE: Adhesive to fix cracked plastic hood

Grandfield, Ok.

On the plastic truck hoods I accept establish smc resin volition bond to the plastic. My thoughts are to employ the smc resin with the recommended harder and fiber glass mat will usually hold. Bounce moma Deere for the correct stuff. Freightliner has some body hood glue which might work. When you detect the right potent report back every bit lots of broken green hoods around.

Edited past bollpuller seven/25/2018 19:17

reedfarmer

Posted 7/25/2018 21:53 (#6892935 - in reply to #6892357) Subject: RE: Adhesive to fix cracked plastic hood

Eastern Arkansas

Grind out the crack, then rivet a piece of steel backside the crack that is effectually 2 inches bigger than the fissure on all sides. Then fill up with a body filler with fiberglass resin in information technology. That is what I take done on my 8420hoods and information technology seems to work well. gearhead9056

Posted seven/25/2018 22:38 (#6893039 - in reply to #6892357) Subject: RE: Agglutinative to fix cracked plastic hood

SESD

Auto trunk supply store will take an epoxy for repairing plastic bumpers, information technology etches itself into the plastic so it stick permenant and flexes with the plastic.

http://www.toolpan.com/3M-Automotive-4240--3M-Duramix-Plastic-Repai...

berggrenfarms

Posted 7/26/2018 08:25 (#6893516 - in reply to #6892357) Subject: RE: Adhesive to fix cracked plastic hood

Nebraska, The country of corn and cattle

I recently bought a hot stapler and plastic welder to fix this kind of stuff, I highly reccomend both, the stapler makes a mechanical connection and the plastic welder just doubles it.

How To Repair Plastic Hood,

Source: https://talk.newagtalk.com/forums/thread-view.asp?tid=795958&DisplayType=flat&setCookie=1

Posted by: jacksonentakeeke.blogspot.com

Share this post